Building Materials & Construction (Mid-term Syllabus - Backlog)

Unit I
Introduction to building materials, physical, mechanical, chemical properties, rocks and stones, bricks and clay, sand and silica, aggregates and water.

Unit II
Cement ,concrete and lime.

Mid Term syllabus Soil Mechanics (Backlog)

CVL 205: Soil Mechanics
 
Unit I: Introduction

Concept of soil,Definition and meaning of soil mechanics, History of soil mechanics

Scope of soil mechanics, Soil formation
 

Unit II: Weight And Volume Relationship Of Soil

  Definition of soil mass, Components of soil mass, Phase diagram of soil mass and its

labeling, Weight and volume of soil with usual notation, Dry soil and wet soil

Void ratio, Porosity and their relations, Types of water in soil, Bulk density, saturated,

submerged and dry density, Difference between adsorbed water and absorbed water in

soil, Saturated, partly saturated and dry soil

Unit III: Classification Of Soil

 

 

Definition of Coarse and fine grained soil, Homogeneity, Consistency, Cohesiveness,

Toughness, Shear strength, Compressibility, Difference between coarse and fine grained

soil, Two methods of soil classification, Grain size classification of soil as per I.S.I and

classification of soil using plasticity chart, Sieve analysis and Stoke’s law, Sedimentation

analysis of soil, Particle size - Distribution curve on semi log scale, States of consistency and

its diagram, Consistency limits- Liquid limit, plastic limit, shrinkage limit and plasticity

index (P.I), Laboratory methods to find out these limits, Field identification tests

Unit IV: Permeability

Definition and understanding of permeability, Different types of soil and permeability,

Laminar and turbulent flow, Importance of permeability, Darcy’s Law

Coefficient of permeability and its determination in laboratory, Factors affecting

permeability, Confined and unconfined aquifer, Dupit’s Formula, Field determination of

permeability by pumping out and pumping in test, Concepts meaning of seepage, Effects of

seepage, Flow lines and flow net diagram (only understanding)

CVL354: Concrete Lab - Section C

The list of experiments for CVL354: Concrete Lab can be accessed from the following link. The tutorial on mix design also can be accessed using the link below.

1. List of Experiments
2. Tutorial on Mix Design

The students are required to prepare a Design Mix Concrete of Grade M30, using the properties obtained from testing the materials, and submit it in the next Laboratory Class.

Revised 3rd yr attendance

Revised 3rd yr attendance

Students not filling the end term examination form

The following students have not yet filled the end-term examination form. You may contact me for further clarification. IVth Year
S.No	Roll No	Name
1	100107055	Bittu Suresh Kumar
2	100107108	Mayank Bharadwaj
3	100107140	NISHANT DHARIWAL
4	100107142	NITESH SINGH
5	100107161	PRATYUSH SHARMA
6	100107184	RUPENDRA SINGH ANURAG
7	100107205	SHASHANK CHANDRA
8	100107212	SHIV PRATAP SINGH
9	100107802	AVDHESH
IIIrd Year
S.No	Roll No	Name
1	110107077	IMRAN BAIG
2	110107148	RAJAN SINGH
3	110107227	Sundram Chandan
4		Santanu
5		Yumge padu
6		Nitin Sharma
7	100107041	Ashutosh singh

Industrial Economics Notes

Industrial Economics Notes

CHY 102 Applied Chemistry

Applied Chemistry notes

3rd year A and B (CVL 304)

Students of Class 3A and 3B were not present in their steel lecture class on 25th feb 2014

3 A 12:25 to 1:20pm

3 B 2:15 to 3:10 pm

topic to be taught : built up column (batten) and they have been marked absent

in the next class , next topic will be taught (eccentrically loaded column)

Assignment with answer
https://docs.google.com/document/d/1uCDDpsCx0Hwl94BnQaxGTMOcNv-gqhyKLIeLfeybVAc/edit?usp=sharing

OCF TUT class swapping

The OCF tut classes of section B has been changed a bit w.e.f. 24.2.14.
OCF G1 (2.15pm-3.10pm)
OCF G2(1.20pm-2.15pm)

mods - mte syllabus for backlog

syllabus for mods MTE backlog

1. simple stress and strains, elastic constants
2. analysis of stress : principal stresses
3. bending stresses in beams

OCF class test-1

MId term Syllabus ---UNIT-I & UNIT-II(till critical depth calculation)

Schedule of OCF class test-1

Section A         12.25pm (G1)      3.10pm(G2)         (26.2.14 Wed)
Section B         1.20pm (G2)        2.15pm (G1)        (27.2.14Thur)
Section C        11.30am(G1) (26.2.14 wed)           3.10pm(G2)(27.2.14)

Note***Anyone not appearing the test will get a zero. No one will be given another chance after the given date.

please find lab manual

https://drive.google.com/file/d/0Bwy1ZhlP9e41U0dtQXJSNDNvZ0k/edit?usp=sharing

OCF UNIt-II

The link of OCF_UNIT-II is here.

Regular MTE Schedule

Regular MTE Schedule 

Attendance till 14th Feb

Attendance till 14th Feb

If there is any discrepancy, contact the concerned faculty

Passes for Chorus 2014

The passes for Chorus are available in the department. You may collect the same between 02:00pm - 04:00pm from room no. 104, set3.

Regular Classes on 21st Feb

As the Chorus Inauguration is scheduled for tomorrow at 05:00pm, regular classes shall be held tomorrow i.e., on 21st Feb, 2014. 

Attendances for the classes shall be marked as in the regular days.

class test for Advance Surveying on 26 feb 2014

There is a class test for Advanced Surveying on 26 Feb 2014 in respective class as per time table. It is compulsory for all students for Section 3A, 3B& 3C. The course is for 1st unit & 2nd unit. I have all ready given my notes for photocopy [1st & 2nd unit of advanced surveying] in shop near cafe.
   

CVL 304 Design of steel structures

lecture notes of built up column  and connections

CVL 304 Design of steel structures

All the students of 3rd year civil are requested to make a group 3 to 4 people and submit their groups member names on or before 27th feb 2014 for the steel structure project/presentation  to their respective class teacher 

3rd year sec B

Design of steel Structure

there will be change in class timing of Steel structure lecture on Wednesday
8th lecture (3:10-4:05 pm) on Wednesday  will be shifted to 7th lecture (2:15-3:10 pm) on Tuesday 

End Term Examination Form Filling

Those of you who have not yet filled the end term examination form may fill the same between 10:30am - 12:00noon today. NO further date shall be announced for the same.

Backlog/Improvement ED: Assignment 1

Submit the assignment on or before 28-02-14. Late submission will attract -2 marks for every day of late submission. List of question are given at the link:

https://drive.google.com/file/d/0Bwy1ZhlP9e41SjBXbkctQU5QZm8/edit?usp=sharing

Backlog/Improvement ED: Syllabus

Here it is
https://drive.google.com/file/d/0Bwy1ZhlP9e41ZWRyYVBBZ2RIUU0/edit?usp=sharing

Four units will be for MTE from the above syllabus.

Cocubes pre-assessment test (19 Feb) canceled

The Cocubes pre-assessment test for the remaining 3rd year students will not be conducted tomorrow (19th February, 2014). 

The new date for conducting the test will be intimated to you shortly.

new and revised time table wef 19th feb.

Below is the new and revised time table wef 19th feb.

TT wef 19th Feb 2014

Syllabus for mid term "CVL 304( Design of steel structures)

Syllabus for mid term "CVL 304( Design of steel structures)

Unit 1 : Welded and riveted connections
Unit III : Tension member
Unit II : Compression member up to built up column only

Co cubes test tomorrow on 18 Feb 2014

Dear all,

Those who have registered earlier have been issued their login and password. These students will be assessed tomorrow (18th Feb, 2014) as per the schedule given below. Remaining students would be assessed on 19th Feb, 2014. Kindly intimate the students.

 

CoCubes Pre-Assessment Program  Date:- 18/02/14 (9:00 AM - 12:00 Noon)

 

PGDM Building

7th Floor

805-E

CIVIL

Co cubes test (test dates 18 and 19 Feb 2014)

Dear All,

Kindly inform the all the 3rd year students to provide their details on the below mentioned link for co cubes test

https://docs.google.com/a/sharda.ac.in/forms/d/1MPe0Q9zRZEBds6rSpk49s9KXtIKrPFbIKizMuHbnquc/viewform

CVL204: Structural Analysis - Backlog/Improvement - Syllabus for Mid Term Examination

Please find below the Syllabus of CVL204: Structural Analysis for Backlog/improvement Students

Unit – I: Propped Cantilevers

Analysis of propped cantilevers-shear force and Bending moment diagrams-Deflection of propped cantilevers.

Unit  – II: Fixed Beams

Introduction to statically indeterminate beams with U.D.load central point load, eccentric point load. Number of point loads, uniformly varying load, couple and combination of loads shear force and Bending moment diagrams-Deflection of fixed beams effect of sinking of support, effect of rotation of a support.

Unit – III: Continuous Beams

Introduction-Clapeyron’s theorem of three moments- Analysis of continuous beams with constant moment of inertia with one or both ends fixed-continuous beams with overhang, continuous beams with different moment of inertia for different spans-Effects of sinking of supports-shear force and Bending moment diagrams.

Unit – IV: Slope-Deflection Method

Introduction, derivation of slope deflection equation, application to continuous beams with and without settlement of supports. 

Industrial Economics Notes

Industrial Economics Notes

Filling up of online Even Term Regular Examination Form

Filling up of online Even Term

Regular Examination Form

The Online Examination Forms (Regular) for Even Term (VI/VIII) are to be filled from 17^th Feb 2014 to 21^th Feb 2014. The login details to fill the online forms are as under:

Website: http://128.10.090:8080

User Name: Enrollment No.

Password: Roll No.

Venue: CAD Lab, Room No. 203, SET-III

The schedule for filling the forms is as,

4^th year: 17^th (A & B) and 18^th Feb (C & D), 2014

Sec-A: 10:00 am – 12:00 noon

Sec-B: 02:00 pm – 04:00 pm

Sec-C: 10:00 am – 12:00 noon

Sec-D: 02:00 pm – 04:00 pm

3^rd year: 19^th Feb, 2014

Sec-A: 10:00 am -12:00 noon

Sec-B: 12:00 noon – 02:00pm

Sec-C: 02:00pm – 04:00pm

Cocubes assessment schedule- Test dates are 18 and 19 Feb 2014

URGENT

All the 3rd year students must register for Cocubes assessment immediately.  Appearing in this test  is mandatory for all the 3 rd year students. If the student do not appear for this co cube test then any help from DCA for placement may not be possible ( Test dates are 18 and 19 Feb 2014).

 

the link for submitting the information by 3rd year students is given below-

https://docs.google.com/a/sharda.ac.in/forms/d/1MPe0Q9zRZEBds6rSpk49s9KXtIKrPFbIKizMuHbnquc/viewform

 

Industrial Economics Notes

Industrial Economics Notes

OCF ASSIGNMENT 1

Download the file for viewing. 
The link for Assignment 1 is here.

Submit the Assignment latest by  14.2.14.

Time table with minor modifications for 3rd year civil

Time table can be assessed

chhavi gupta

engineering dynamics notes
unit-1 
unit-2

engineering dynamics 
section-B, chhavi gupta
assignment last date 20-2-2014
assignment ED

CVL 304 Design of Steel Structure

All the student of 3rd year civil submit there assignment on 16/2/2014

Assignment of steel structure can be assessed 

Notice of form fill up of the backlog/improvement for end term May 2014

Here is the link for the notice of form fill up of the backlog/improvement notice

New Time Table W.e.f. 11 feb 2014

Here is the link for the new time table from w.e.f. 11 feb 2014.

OCF presentation Topics (groups submitted)

Those who have not submitted will be grouped by me.

SEC -A	1	2	3	4	5	6	7	8	9	10	11
	110107025	110107031	110107061	110107046	110107043	110107076	110107034	110107077	110107080	110107020	110107053
	110107006	110107042	110107062	110107051	110107073	110107078	110107016	110107068	110107081	110107021	110107079
	110107070	110107039	110107049	110107072	110107009	110107052	110107023	110107058	110107054	110107004	110107085
	110107001	110107002		110107003	110107030	110107082	110107081	110107060	110107071	110107017
SEC-B	1	2	3	4	5	6	7	8
	110107125	110107171	110107154	110107164	110107116	110107156	110107118	110107097
	110107132	110107226	110107161	110107172	110107146	110107159	110107135	110107099
	111017152	110107168	110107147	110107163	110107092	110107133	110107131	110107098
	1101077166	110107155	110107174	110107167	110107094			110107140
	9	10	11	12	13	14
	110107160	110107169	1101017123	110107112	110107136	110107149
	110107115	110107127	110107124	1101017093	110107151	110107122
	1101017130	110107127	110107103	110107129	110107141	110107165
	110107090	110107170	110107127		110107139	110107128
SEC-C	1	2	3	4	5	6	7	8	9
	110108021	110107202	110107179	120107813	110107210	110107204	110107227	120107815	110107213
	110107203	110107193	110107176	120107807	110107197	110107212	120107801	100107219	100107206
	120107807	100107123	110107196	120107802	110107201	110107182	120107806	100107806	100107136
	110107205	110107195	110107178		110107186	110107177	120107818

NOTICE REGARDING THE INDUSTRIAL VISIT

NOTICE REGARDING THE INDUSTRIAL VISIT OF CIVIL ENGG. DEPT. (3^RD YEAR)

• ·   Schedule:  7^th Feb 2014, 1.00pm to 3.30pm.
• ·  Students Selected for industrial visit should be in decent clothes on the day of visit .
• ·  It is mandatory to submit visit report on the given format (format is to be provided on the day of visit) to get attendance of second half of Friday.
•    No refund in case of absence on the day of visit.
• · Rs. 50/- will be deducted from the security fee for certificate, refreshment and transportation.

OEL 005 Engineering Dynamics Sec 3-A Test-1 Marks

The class test-1 marks of section 3-A, which was conducted on the last week i.e on 30 Jan-14 for open elective Engineering Dynamics can be seen in the below link:

https://docs.google.com/spreadsheet/ccc?key=0Agy1ZhlP9e41dEk2VHY3NmhuUTIxUVh1R3FpN09vNEE&usp=sharing

Change in Open Elective

Based upon your application, following changes have been effected in the open elective course of the following students,

	BTech (CE) 3rd Year
S. No.	Roll No.	Student Name	New Allotted Course	Section/Room
17	110107122	NIKHIL CHAUHAN	OE8 (Industrial Instrumentation)	SECTION-A 410 (SET-I)
58	110107116	NAKUL BHARANA	OE8 (Industrial Instrumentation)	SECTION-A 410 (SET-I)
63	110107041	ARUN KUMAR	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
65	120107809	Marius Muvvnyi	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
72	110107077	IMRAN BAIG	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
76	110107103	MD.SIRTAZ	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
77	110107113	MUNISH RAZA	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
78	110107114	MUSHEER AHMAD	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
83	110107172	SAURABH KUMAR	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
84	110107188	SHUBHAM AGARWAL	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
87	120107802	Amit Kumar Somavat	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
90		Yumge Padu	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
94	110107001	AAKASH KAMBOJ	OE2 (OOPS Using C++)	SECTION-A 504 (SET-I)
110	110107061	DIVYA BHARTI	OE8 (Industrial Instrumentation)	SECTION-A 410 (SET-I)
113	110107094	MAHIM AFZAL KHAN	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
114	110107099	MANISH KUMAR SHUKLA	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
121	110107169	SATYAM SHEKHAR REJA	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
131	100107123	MOHD ARISH	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
133	120107801	Aman Kumar	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
137	100107806	mohit bhatia	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
147	110107097	MANINDER SINGH BISHT	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
151	110107118	NARESH KUMAR TANWAR	OE1 (Engineering Dynamics)	SECTION-B 211 (SET-II)
169	110107220	MANDIP KHAREL	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)
170	120107812	Parichit Thapa	OE1 (Engineering Dynamics)	SECTION-C 205 (SET-III)